Workshop Items/Universal Mower Spares

.325 7 teeth, small. Suitable for Husqvarna, Stihl and many other makes of chainsaw which have .325 pitch chain fitted.

GHS Part No. 2609
REPLACES OEM N/A

.325 8 teeth, small size (19mm internal hole diameter)..

GHS Part No. 2610
REPLACES OEM N/A

10W/40 lawnmower engine Oil

GHS Part No. 1032
REPLACES OEM N/A

For two stroke fuel. Ideal for most 2 stroke engines, will mix 1 litre of petrol at 25:1, 32:1, 40:1 or 50:1.

GHS Part No. 1569
REPLACES OEM N/A

2 Stroke Oil

GHS Part No. 1607
REPLACES OEM N/A

SAE 30 lawnmower Engine Oil

GHS Part No. 1031

1 Metre of oil and fuel resistant hose with a textile braid. 1/2 (13mm) ID x 17.5mm OD.

GHS Part No. 3884
REPLACES OEM N/A

Standard 1/2" hose pipe joiner.

GHS Part No. 3950
REPLACES OEM N/A

Replacement part suitable for 1/4" hose pipe & fuel line.

GHS Part No. 1303
REPLACES OEM N/A

1 Metre of oil and fuel resistant hose with a textile braid. 1/4 (6mm) ID x 10.5mm OD.

GHS Part No. 3881
REPLACES OEM N/A

1/4" ID x 30 Metres Clear PVC.

GHS Part No. 2105
REPLACES OEM N/A

Original JOJO part suitable for some garden machinery.

GHS Part No. 3171
REPLACES OEM N/A

A handy recoil repair kit comprising of: 10.4mm HSS drill bit, Tap, Coil driver, Tang remover, approx 25 coil inserts & instructions. All supplied in a metal container.

GHS Part No. 3784
REPLACES OEM N/A

Replacement part suitable for Countax & Westwood lawn tractors. Straight valve.

GHS Part No. 3009
REPLACES OEM N/A

110 piece set comprising the following sizes: 30 X 1/4, 25 X 5/16, 20 X 3/8, 15 X 7/16, 10 X 1/2, 10 X 5/8

GHS Part No. 4289
REPLACES OEM 4289

110 volt 16 amp 3 pin trailing weather proof socket. Conforms to IEC309-2.

GHS Part No. 3789
REPLACES OEM N/A

110 volt 16 amp 3 pin trailing weather proof socket. Conforms to IEC309-2.

GHS Part No. 3791
REPLACES OEM N/A

110 Volt 16 Amp wall or panel mounted weather proof socket. Conforms to IEC309-2

GHS Part No. 3787
REPLACES OEM N/A

Batery charger suitable for use with Hayter & Mountfield lawnmowers. Charge time 14-16 hours, produced to EN60 950 standard, input 230 v AC50HZ (0.003A). Please refer to manufacturers manual before recharging your battery

GHS Part No. 2014
REPLACES OEM N/A

3/16, 4.8mm stone. Suitable for 12V hand held grinder where a screw in thread is required.

GHS Part No. 3399
REPLACES OEM N/A

7/32, 5.5mm stone. Suitable for 12V hand held grinder where a screw in thread is required.

GHS Part No. 3400
REPLACES OEM N/A

Approximatley 120 pieces - 6 of each - 9.5 x 19.1mm, 9.5 x 15.9mm, 9.5 x 38.1mm

GHS Part No. 3133
REPLACES OEM N/A

120 Piece Zinc plated carbon steel screws with drill point set comprising of the following sizes: 16 of each 8 x 12.5mm, 8 x 16mm, 8 x 19mm, 8 x 25mm 14 of each 10 x 10mm, 10 x 12.5mm, 10 x 20mm, 10 x 25mm

GHS Part No. 4288
REPLACES OEM 4288

A handy recoil repair kit comprising of: 12.4mm HSS drill bit, Tap, Coil driver, Tang remover, approx 10 coil inserts & instructions. All supplied in a metal container.

GHS Part No. 3785
REPLACES OEM N/A

Pack of 2. Fits our hand held chain sharpeners. 3 sizes available, 5/32, 3/16, 7/32, please state which size when ordering.

GHS Part No. 1874
REPLACES OEM N/A

13 x 5.00 x 6 with straight valve

GHS Part No. 3604
REPLACES OEM N/A

13 x 650 x 6 Straight valve.

GHS Part No. 1625
REPLACES OEM N/A

14 Piece. Sizes: 6, 7, 8, 9, 10, 11, 12mm & 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2". 7 mould forged fully polished chrome plated 6 point sockets. Soft grip handles.

GHS Part No. 1587
REPLACES OEM N/A

M14 x 1.25 thread repair kit. A handy recoil repair kit comprising of: 14.2mm HSS drill bit, Tap, Coil driver, Tang remover, approx 10 coil inserts 12.4mm long & instructions.

GHS Part No. 3806
REPLACES OEM N/A

Replacement part suitable for some lawn tractors. 15 x 600 -6 with straight valve.

GHS Part No. 2936
REPLACES OEM N/A

Replacement part suitable for some lawn tractors. 15 x 600 -6 with angled valve.

GHS Part No. 3512
REPLACES OEM N/A

Replacement part suitable for some lawn tractors. 15 x 600 -6 with angled valve.

GHS Part No. 3512
REPLACES OEM N/A

Approximately 150 pieces Sizes; 2 x 30mm, 1.8 x 33mm, 1.8 x 40mm, 2.8 x 41mm, 3.6 x 44mm, 3.9 x 75mm

GHS Part No. 3141
REPLACES OEM N/A

150 Piece. Wide selection of extended & compressed springs.

GHS Part No. 1909
REPLACES OEM N/A

Replacement part suitable for Stihl, Husqvarna and many other makes where this size wrench is used. 17mm x 19mm sockets with flat screwdriver end for bar adjustment.

GHS Part No. 1098
REPLACES OEM N/A

18 x 850 / 950 x 8 Straight valve.

GHS Part No. 1626
REPLACES OEM N/A

Suitable for lawn tractors and golf buggys

GHS Part No. 3028
REPLACES OEM N/A

Replacement part suitable for 19" Harry lawnmowers. 5/8" centre hole

GHS Part No. 3340
REPLACES OEM 302.40.803

Cleanly extracts oil and water from engines through oil filter or dipstick holes. Also can be used to clean out fish tanks.

GHS Part No. 3310
REPLACES OEM N/A

Test kit designed to detect the presence of 2 stroke oil in petrol. Supplied with full instructions, ideal to find the cause of engine failure. Contains 5 disposable vials.

GHS Part No. 3910
REPLACES OEM N/A

2 way hose pipe splitter with shut off valves.

GHS Part No. 3948
REPLACES OEM N/A

Replacement part suitable for most strimmers/brushcutter using 2.4mm line. 6 sided star line professional quality Alu - cut line. 15 metre easy pack.

GHS Part No. 2857
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 2.5mm x 100 metres

GHS Part No. 3073
REPLACES OEM N/A

3 metre length of 2.8mm Premium quality starter cord.

GHS Part No. 1702
REPLACES OEM N/A

Approximately 225 pieces - Contains 18 popular sizes: 3 x 1, 4 x 1, 4.5 x 2, 5 x 2, 6 x 2, 6 x 2.5, 6 x 3, 7 x 2, 8 x 2, 9 x 2, 10 x 2, 12 x 3, 13 x 3, 14 x 2.5, 17 x 2.5, 18 x 4, 20 x 2, 22 x 2

GHS Part No. 3134
REPLACES OEM N/A

240 volt 16 amp 3 pin trailing weather proof socket. Conforms to IEC309-2.

GHS Part No. 3788
REPLACES OEM N/A

240 volt 16 amp 3 pin trailing weather proof socket. Conforms to IEC309-2.

GHS Part No. 3790
REPLACES OEM N/A

240 Volt 16 Amp wall or panel mounted weather proof socket. Conforms to IEC309-2

GHS Part No. 3786
REPLACES OEM N/A

Professional chain grinder suitable for all common chainsaw chain sizes. High performance motor, rotating tensioning device and grinding head so that both sprocket positions of the chain can be sharpened without resetting, illumination of the sharpening zone, distortion-free aluminium die cast frame, automatic resetting of the grinder head, all settings easy to manage, supplied with grinding discs for use with 3/8" and .404 pitch chain and a grinding disc for use with 1/2" and depth gauges chain and bumper link.

GHS Part No. 3758
REPLACES OEM N/A

Elliptical satin finish, chrome vanadium, hard wearing.

GHS Part No. 4224
REPLACES OEM N/A

26 pieces in 6 popular sizes - 16mm, 22mm, 25mm, 28mm, 35mm, 40mm

GHS Part No. 3140
REPLACES OEM N/A

1 metre length of 2mm ID tygon type fuel pipe.

GHS Part No. 1591
REPLACES OEM N/A

3 lb head, 12" fibreglass shaft, overall length including head 13 3/4" (347mm). Safety googles/head wear must be worn when using this tool.

GHS Part No. 3061
REPLACES OEM N/A

3 Piece bearing puller set comprising of the following sizes: 75mm, 100mm, 150mm reversible for internal or external use

GHS Part No. 1325
REPLACES OEM N/A

2 metre lengths of 3 sizes of starter rope - 3.5mm, 4.5mm & 5.5mm

GHS Part No. 1728
REPLACES OEM N/A

3 way male pipe coupler for use with our part number 2223

GHS Part No. 3951
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 3.5mm x 100 metres

GHS Part No. 3075
REPLACES OEM N/A

3 metre length of 3.5mm Premium quality starter cord.

GHS Part No. 1704
REPLACES OEM N/A

Replacement part suitable for 3/16" hose pipe & fuel line.

GHS Part No. 1321
REPLACES OEM N/A

3/16" ID x 30 Metres Clear PVC.

GHS Part No. 2005
REPLACES OEM N/A

1 Metre of oil and fuel resistant hose with a textile braid. 3/8 (10mm) ID x 15mm OD.

GHS Part No. 3883
REPLACES OEM N/A

3/8" 7 teeth, small size (19mm internal hole diameter).

GHS Part No. 2606
REPLACES OEM N/A

30 metre roll x 1.35 mm thick inner throttle wire.

GHS Part No. 3485
REPLACES OEM N/A

9 of the most common sizes: 30 pcs 1.6mm, 30pcs 3.2mm, 40 pcs 4.8mm, 50 pcs 6.4mm, 50 pcs 9.5mm, 40 pcs 12.7mm, 20 pcs 15.9mm, 20 pcs 19.1mm, 20 pcs 22.2mm

GHS Part No. 3062
REPLACES OEM N/A

2.4mm ID X 4.8mm OD suitable for most small engines requiring this size.

GHS Part No. 4146
REPLACES OEM N/A

Replacement part suitable for most small engines. Very flexible Tygon type tubing.

GHS Part No. 4111
REPLACES OEM N/A

3.2mm ID X 5.3mm OD suitable for most small engines requiring this size.

GHS Part No. 4147
REPLACES OEM N/A

Replacement part suitable for most small engines. Very flexible Tygon type tubing.

GHS Part No. 4112
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3277
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3278
REPLACES OEM N/A

Replacement part suitable for all small engines with this size is fitted.

GHS Part No. 3597
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3279
REPLACES OEM N/A

Replacement part suitable for some small engines where this size is fitted. 35mm x 1.5mm

GHS Part No. 3110
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3280
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3304
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3281
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3305
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3282
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3283
REPLACES OEM N/A

Replacement part suitable for most small engines where this size is fitted. Tygon type tube, very flexible. 1 metre length

GHS Part No. 3014
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 3mm x 100 metres

GHS Part No. 3074
REPLACES OEM N/A

3 metre length of 3mm Premium quality starter cord.

GHS Part No. 1703
REPLACES OEM N/A

Replacement part suitable for Tyres 3.50 x8, 4.00 x 8, 4.00 x 100, 4.80 x 8. Straight valve

GHS Part No. 2823
REPLACES OEM N/A

Oregon file suitable for all makes of chain where this size is required.

GHS Part No. 3418
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 4.5mm x 100 metres

GHS Part No. 3077
REPLACES OEM N/A

3 metre length of 4.5mm Premium quality starter cord.

GHS Part No. 1706
REPLACES OEM N/A

Replacement part suitable for small engines. 4.8mm id x 8mm od x 1 metre length. Good quality flexi fuel line.

GHS Part No. 2759
REPLACES OEM N/A

A clear instant gasket compound from the manufacturers of Hylomar. Permanently flexible & resistant to most automotive fluids. Operating temperature up to 250 degrees. Fills gaps up to 4mm. Engineering grade. Good adhesion to glass, metal, wood & plastics.

GHS Part No. 3816
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3284
REPLACES OEM N/A

Rplacement part, 410 x 350-5, straight valve

GHS Part No. 3143
REPLACES OEM N/A

Rplacement part, 410 x 350-5, straight valve

GHS Part No. 3143
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3285
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3306
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3287
REPLACES OEM N/A

Replacement part suitable for some chainsaws, strimmers. 42mm diameter x 1.2mm thickness

GHS Part No. 2974
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3286
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3288
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3309
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3289
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3290
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3291
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3292
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3293
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3294
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 4mm x 100 metres

GHS Part No. 3076
REPLACES OEM N/A

3 metre length of 4mm Premium quality starter cord.

GHS Part No. 1705
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 5.5mm x 100 metres

GHS Part No. 3079
REPLACES OEM N/A

1 Metre of oil and fuel resistant hose with a textile braid. 5/16 (8mm) ID x 12.5mm OD.

GHS Part No. 3882
REPLACES OEM N/A

Sizes: 1.6 x 25.4mm, 2.4 x 25.4mm, 2.4 x 38.1mm, 3.2 x 31.2mm, 3.2 x 50.8mm, 4 x 63.5mm

GHS Part No. 3139
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3295
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3296
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3307
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3297
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3298
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3308
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3299
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3300
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3301
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3302
REPLACES OEM N/A

6 metre roll. 5mm HT.

GHS Part No. 2143
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 5mm x 100 metres

GHS Part No. 3078
REPLACES OEM N/A

3 metre length of 5mm Premium quality starter cord.

GHS Part No. 1707
REPLACES OEM N/A

A handy recoil repair kit comprising of: 5.2mm HSS drill bit, Tap, Coil driver, Tang remover, approx 25 coil inserts & instructions. All supplied in a metal container.

GHS Part No. 3781
REPLACES OEM N/A

6" o.d, 1.5" wide solid rubber with diamond tread. 1/2" i.d shaft size, hub length 1 3/8" off set

GHS Part No. 3843
REPLACES OEM N/A

Replacement part suitable for all small engines taking this size of piston ring.

GHS Part No. 3303
REPLACES OEM N/A

9" long Hardened and tempered, drop forged, carbon steel 2.7kg(6lb) wedge. For use with a sledgehammer or maul. Always use protective equipment when using this item.

GHS Part No. 3700
REPLACES OEM N/A

1 Metre length of 6mm x 9mm Tygon type flexible fuel pipe.

GHS Part No. 3498
REPLACES OEM N/A

Suitable for all types of garden and small plant machinery where this size is used. 6mm x 100 metres

GHS Part No. 3080
REPLACES OEM N/A

A handy recoil repair kit comprising of: 6.3mm HSS drill bit, Tap, Coil driver, Tang remover, approx 25 coil inserts & instructions. All supplied in a metal container.

GHS Part No. 3782
REPLACES OEM N/A

Replacement wheel suitable part for many lawnmowers using this size: 1 1/2" (38mm) width, hole centre 1/2" (12.7mm), Hub length 1 3/8 (34.9mm).

GHS Part No. 3892
REPLACES OEM N/A

720 pieces, spring c type internal & external star washers

GHS Part No. 3142
REPLACES OEM n/a

6 metre roll. 7mm HT.

GHS Part No. 2142
REPLACES OEM N/A

Replacement suitable part for many lawnmowers using this size: 1 3/4" (44mm) width, hole centre 1/2" (12.7mm). Hub length 1 3/8 (34.9mm).

GHS Part No. 3893
REPLACES OEM N/A

A handy recoil repair kit comprising of: 8.3mm HSS drill bit, Tap, Coil driver, Tang remover, approx 25 coil inserts & instructions. All supplied in a metal container.

GHS Part No. 3783
REPLACES OEM N/A

230mm x 22mm bore. Max speed 6600rpm 80m/s. Suitable for general masonry such as roof tiles,med facing bricks, reinforced concrete, concrete kerbs, slabs, lintels, paviors, soft face bricks, soft slate, hard & medium sand stone.

GHS Part No. 3042
REPLACES OEM ABDE230M

Made from chrome vanadium steel with professional satin finish. Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50.

GHS Part No. 3373
REPLACES OEM N/A

Comfortable folding ear defenders offer high levels of protection across a wide range of hazardous noise problems. Conforms to EN352-1. Protection levels: H = 34 M = 31 L = 24, SNR = 33db.

GHS Part No. 3817
REPLACES OEM N/A

Replacement part suitable for the following Alko models: H1100, H1300, H1600, H1800, H2200.Length 55mm, width 45mm, axle hole 24mm.

GHS Part No. 4216
REPLACES OEM N/A

Replacement parts suitable for the following Alko models: H1100, H1300, H2200. Hole centres 35mm, 8mm hole. 76mm long x 32mm wide.

GHS Part No. 4215
REPLACES OEM N/A

Replacement parts suitable for the following Alko models: H1800 H2200 H3000 H3200. 45mm hole centres, 8mm hole 114mm long.

GHS Part No. 4217
REPLACES OEM N/A

Replacement part suitable for the following ALko shredders: H2200, B3000, B3200. Length 80mm, width 44mm, axle hole 24mm.

GHS Part No. 4218
REPLACES OEM N/A

For lawn & garden tractors. 65" x 44" x 40". No eyelets.

GHS Part No. 1910
REPLACES OEM N/A

For 18" - 22" pedestrian lawnmower mowers.

GHS Part No. 1911
REPLACES OEM N/A

Replacement part suitable for Suffolk, Qualcast & many other machines. 1/4" ID x 1 metre

GHS Part No. 2849
REPLACES OEM N/A

Replacement part suitable for Suffolk, Qualcast & many other machines. 3/16 ID x 1 Metre long

GHS Part No. 2850
REPLACES OEM N/A

Replacement part suitable for some Atco, Suffolk & Villiers engines which use a brass fuel tap. 1/8 BSP for 3/16 tube.

GHS Part No. 3473
REPLACES OEM N/A

Replacement part suitable for some Atco, Suffolk & Villiers engines which use a brass fuel tap.

GHS Part No. 3472
REPLACES OEM N/A

For 12V lead acid batteries rated at 2.5AH. Charge time 14 to 16 hours produced to EN60 950

GHS Part No. 2014
REPLACES OEM N/A

145mm Dia, 4.7mm Thick, 22.3mm Bore size

GHS Part No. 3039
REPLACES OEM N/A

Replacement part suitable for all bench grinders where this size disc is used. Disc dimensions: 145mm x 4.5mm x 22.2mm bore. Suitable for 3/8 Standard & 404 pitch chain.

GHS Part No. 3458
REPLACES OEM N/A

Bench mounted rivet spinner insert suitable for 3/8 low profile & .325 pitch chainsaw chain. 22mm long x 10mm wide, please check these dimensions against your current insert.

GHS Part No. 3827
REPLACES OEM N/A

Bench mounted rivet spinner insert suitable for 3/8 standard & .404 pitch chainsaw chain. 22mm long x 10mm wide, please check these dimensions against your current insert.

GHS Part No. 3826
REPLACES OEM N/A

Original Black & Decker part suitable for most of their range.

GHS Part No. 3474
REPLACES OEM 794164

Replacement part suitable for the following Black & Decker Reflex models: GL315, GL337/SB, GL350, GL500, GL546SC, GL600, GL650/SBC, GL651SB, GL652, GL653, GL655, GL656, GL660PC/SPC, GL670PC/SPC, GL675, GL680, GL685, GL686, GL687, GL690, Grass Hog GH600 (twin)

GHS Part No. 3456
REPLACES OEM A6441

For balancing rotary lawnmower & brushcutter blades.

GHS Part No. 1003
REPLACES OEM N/A

300ml Brake Cleaner. An effective way to remove dust and residue. Leaves no residue.

GHS Part No. 2574
REPLACES OEM N/A

Replacement part suitable for Briggs & Stratton, Tecumseh & many others. 1/4" fuel hose, metal tap with screw in thread.

GHS Part No. 1817
REPLACES OEM N/A

Replacement parts suitable for Briggs & Stratton 5HP Quantum engine model numbers: 83400, 90700, 91700, 99700, 12A800, 12D800, 121700, 121800, 122700, 126700, 126800

GHS Part No. 1181
REPLACES OEM 498260

Replacement part suitable for Quantum & Max engines with the following engine model numbers: 90700, 91700, 100700, 110700.

GHS Part No. 2825
REPLACES OEM 398183, 490937

Replacement parts suitable for Briggs & Stratton engines. Pack of 2.

GHS Part No. 2566
REPLACES OEM 222698

Fits engines without fuel pumps. Stepped ends. Will fit 5mm or 6mm.

GHS Part No. 1199
REPLACES OEM N/A

General purpose work gloves. Cotton / polyester seamless knotted liner, natural rubber coated palm & fingers. Large size.

GHS Part No. 1586
REPLACES OEM N/A

General purpose work gloves. Cotton / polyester seamless knotted liner, natural rubber coated palm & fingers. Large size 10. Pack of 5 Pairs

GHS Part No. 1337
REPLACES OEM N/A

General purpose work gloves. Cotton / polyester seamless knotted liner, natural rubber coated palm & fingers. Large size. Pack of 60 Pairs

GHS Part No. 1828
REPLACES OEM N/A

Usefull for replaceing broken cable nippples.

GHS Part No. 3240
REPLACES OEM N/A

Replacment parts suitable for Camon BCS & Others. Set of 16 Blades, 8 Left hand, 8 Right hand.

GHS Part No. 1824
REPLACES OEM N/A

300ml Can. Solvent cleaner for use on internal & external surfaces. Also removes oily deposits from cables & linkages. Removes grease and gum deposits from carburettors.

GHS Part No. 2033
REPLACES OEM N/A

Small engine carburettor pressure tester. An essential service tool designed for professional or home use for the leak testing of diaphragm carburettors, small engine crankcases, pulse & fuel lines.

GHS Part No. 3607
REPLACES OEM N/A

Original Carlton spark plug replaces NGK BMR6A and is suitable for all engines where this type of spark plug is used.

GHS Part No. 3769
REPLACES OEM BMR6A

Carlton spark plug suitable for all applications using this type of plug.

GHS Part No. 3740
REPLACES OEM BPM6A

Original Carlton spark plug replaces NGK BPMR7A and is suitable for all engines where this type of spark plug is used.

GHS Part No. 3768
REPLACES OEM BPMR7A

Carlton spark plug suitable for all engines which use an NGK B6HS spark plug.

GHS Part No. 3708
REPLACES OEM B6HS

Original Carlton CA8E spark plug suitable replacement for NGK BM6A.

GHS Part No. 3356
REPLACES OEM CA8E

Includes 12v automobile power adaptor and alligator clips. Comes with 3 stones, 5/32, 3/16, 7/32

GHS Part No. 3050
REPLACES OEM 78015

Replacement part suitable for Castel Garden NG410 & NG414 Rotarty Lawnmowers. 390mm long, 18mm hole centre.

GHS Part No. 3492
REPLACES OEM 81004233/2

Replacement part suitable for the following Castel Garden machines: GB504, GB504 TR / TRE, M504, M504 TR/TRE, NG504, NG504 TR/TRE. Boss dimensions: 25mm diameter, 48mm tall, 62mm top diameter

GHS Part No. 3484
REPLACES OEM 22463021/0

Replacement part suitable for Twin Cut models: TC92, TC102, TC122. 20mm shaft size, 65mm pin centres, 27mm depth.

GHS Part No. 3191
REPLACES OEM 25463200/0

Replaacement part suitable for Castel garden TC92, TC102, TC122 tractors. Pulley dimensions: outer diameter 49.6mm, inner diamter 39.5mm. Bore 14.75mm

GHS Part No. 3439
REPLACES OEM 25601570/0

Replacement part suitable for most Castel Garden, Champion, Mountfield EL63 & some Honda lawnmowers. 4mm x 15mm

GHS Part No. 3017
REPLACES OEM 12139100/0

Genuine part suitable for many Castel, Champion & Mountfield machines. Fits model types R434TR, R484TR, R534TR, RL534TR, RL484TR, RL534TR. Shaft length 470mm long, 12mm dia. 90mm & 282mm length from ends of shafts to gearbox.

GHS Part No. 2983
REPLACES OEM 81003076-0

Replacement part suitable for most Castel Garden Lawn tractors, Mountfield XE70, EL63. Letters clockwise S, B, G, L, M

GHS Part No. 2937
REPLACES OEM 18450065, /0, /

Genuine part suitable for Castel Garden, Mountfield, Alipina, stiga. Models XH55, SH160, HT55

GHS Part No. 2982
REPLACES OEM 6981161/1

Easy to use tool, universal for all makes & sizes of chainsaw chain

GHS Part No. 3262
REPLACES OEM N/A

A simple but time saving chart for counting out saw chain & checking pitch sizes.

GHS Part No. 1354
REPLACES OEM N/A

Chain breaker punch suitable for most chain breakers.

GHS Part No. 3261
REPLACES OEM N/A

Suitable for all sizes of chainsaw files.

GHS Part No. 3111
REPLACES OEM N/A

Suitable for all chainsaw guide bars with sprocket nose ends. Metal construction with pump action

GHS Part No. 3489
REPLACES OEM N/A

Handy pouch to keep your chainsaw tools altogether. Made from PVC this pouch has a press seal button and measures 240mm x 115mm. Tools NOT Included.

GHS Part No. 3864
REPLACES OEM N/A

The kit contains, 17mm x 19mm combination spanner for spark plug & bar nuts removal. Bar groove cleaner and a small screwdriver for carburettor adjustment. All supplied in a handy washable pouch.

GHS Part No. 3868
REPLACES OEM N/A

Genuine Champion CJ8 spark plug

GHS Part No. 3336
REPLACES OEM CJ8

Champion J19LM spark plug

GHS Part No. 3730
REPLACES OEM J19LM

Champion J8C Spark Plug

GHS Part No. 3361
REPLACES OEM J8C

Replacement part suitable for Champion powerdrive mowers model numbers: NG464TR, NG504TR, NG504TRE, R484, RL484, TD484, TDL484, 534TR, 534TRE. 22mm bore, 69mm high, 65mm pin centres.

GHS Part No. 1993
REPLACES OEM 22465607/0

Champion N9YC spark plug

GHS Part No. 1559
REPLACES OEM N9YC

Champion RC12YC spark plug

GHS Part No. 3381
REPLACES OEM RC12YC

Champion RCJ8 Spark Plug

GHS Part No. 3362
REPLACES OEM RCJ8

Original Champion RDJ7Y spark plug suitable for all engines using this type of spark plug.

GHS Part No. 3357
REPLACES OEM RDJ7Y

Champion RDJ8J spark plug

GHS Part No. 3380
REPLACES OEM RDJ8J

Genuine Champion RJ17LM spark plug

GHS Part No. 3332
REPLACES OEM RJ17LM

Pack of 5 Genuine Champion RJ17LM spark plugs

GHS Part No. 3333
REPLACES OEM RJ17LM

Genuine Champion part suitable for some lawnmower engines where this type is fitted.

GHS Part No. 3011
REPLACES OEM RJ19LM

Genuine Chanpion spark plugs suitable for some lawnmowers where this type of plug is fitted.

GHS Part No. 3012
REPLACES OEM RJ19LM

Original Champion part suitable for all engines that use this type of spark plug.

GHS Part No. 3764
REPLACES OEM RL95YC

Original part suitable for many Champion, Lawnking, Sovereign and other lawnmowers. Please check the following sizes before ordering: OD 165mm, Hole centre 26mm, 45mm wide.

GHS Part No. 3887
REPLACES OEM 81007317-0

Original part suitable for many Champion, Lawnking, Sovereign and other lawnmowers. Please check the following sizes before ordering: OD 170mm, Hole centre 26mm, 45mm wide.

GHS Part No. 3888
REPLACES OEM 81007326-0

Clean cut cloth rags suitable for workshop use, 10kg bag.

GHS Part No. 3852
REPLACES OEM N/A

Replacement parts suitable for Countax & Westwood sweepers. High quality replacement brushes. 145mm in total length. Half webbed for extra strength. Please note that when measuring your old brushes that they will be worn and will not give a true length. Pack of 79 brushes

GHS Part No. 2882
REPLACES OEM 14898101

Replacement parts suitable for Countax & Westwood sweepers. High quality replacement brushes. 145mm in total length. Half webbed for extra strength. Please note that when measuring your old brushes that they will be worn and will not give a true length. Pack of 54 brushes

GHS Part No. 2881
REPLACES OEM 14898101

Replacement parts suitable for Countax & Westwood sweepers. High quality replacement brushes. 145mm in total length. Half webbed for extra strength. Please note that when measuring your old brushes that they will be worn and will not give a true length. Pack of 51 brushes

GHS Part No. 2880
REPLACES OEM 14898101

0 options available

Replacement parts suitable for Echo models fitted with Zama Carburettors pre-fixed with C1U: K10, K10A, K12, K13, K18, K18A, K18B, K20, K20A, K20B, K20C, K21, K21A, K21B, K22, K22A, K23, K23A, K35, K35A, K45. Echo models: GT-2103, J30S, JD-30S, J/D-38B, J21C, D21C, J21S, D21S, D30S, SRM-2301, SRM-2310, SRM-2501, SRM-2501S, SRM-2510, SRM-3000, SRM-3800, HC-1500, HC-1600, HC-2000, HC-2100, HC-2300.

GHS Part No. 2451
REPLACES OEM N/A

2 pin Euro socket as used on electric garden shredders etc..

GHS Part No. 1320
REPLACES OEM N/A

Pack of 10 extra thin 115 X 1.0 X 22mm cutting discs. Use with 41/2" grinder.

GHS Part No. 1362
REPLACES OEM N/A

Genuine Flymo part suitable for following Garden Vac models: GardenVac : 9648608-01, 9648610-01, 9648612-01 1500 Plus : 9648619-01, 9648620-01, 9648626-01, 1600 Plus : 9648628-01, 1800 Turbo : 9648631-01, 9648635-01, 2200 Turbo : 9648629-01, 9648630-01, 9648633-01, 9648639-01, 2500 : 9648636-01, 2700 : 9669527-01

GHS Part No. 3066
REPLACES OEM 5118400-80/2

Replacement part suitable for many machines. As fitted to Flymo, McCulloch, Partner, Husqvarna & Stihl models. 21mm dia, twin pipe fitting, approx 33mm tall. Picture shows both sides to the primer. Colours may vary.

GHS Part No. 2903
REPLACES OEM N/A

3/16 (4.76mm) x 30cm long square keysteel.

GHS Part No. 3665
REPLACES OEM N/A

1/4" (6.35mm) x 30 cm long square keysteel.

GHS Part No. 3666
REPLACES OEM N/A

Replacement part suitable for most small engines as fitted to hedgetrimmers and strimmers.

GHS Part No. 1044
REPLACES OEM N/A

Replacement part suitable for most small engines where this size is fitted. 2mm id x 4mm od. 1 metre length.

GHS Part No. 2980
REPLACES OEM N/A

1 Metre of each: 1/4" ID Clear pipe, 3/16" ID Clear pipe, 2mm ID Tygon pipe, 3.5mm Starter rope, 4.5mm Starter rope, 5.5mm Starter rope

GHS Part No. 1260
REPLACES OEM N/A

Replacement part suitable for most small engines. 2.4mm id x 4.8mm od. Quality flexible fuel hose.

GHS Part No. 2977
REPLACES OEM N/A

Replacement part suitable for most small engines where this size is fitted. 3.2mm id x 5.3mm od. Quality flexible fuel line.

GHS Part No. 2976
REPLACES OEM N/A

Replacement parts suitable for all garden machinery. 10 metre rolls of 2.8mm, 3.5mm, 4.5mm, 5.5mm.

GHS Part No. 2887
REPLACES OEM N/A

7 assorted pieces, 6" x 6".

GHS Part No. 1602
REPLACES OEM N/A

Camloc original part suitable for many applications including Generator hoods.

GHS Part No. 3069
REPLACES OEM SWFIB4200240B4L

Chainsaw guide bar grease gun supplied with grease.

GHS Part No. 3045
REPLACES OEM N/A

400ml. Great for lubricating, displacing water etc With PTFE.

GHS Part No. 2491
REPLACES OEM N/A

Pair of 8mm handlebar bolts and nuts.

GHS Part No. 1681
REPLACES OEM N/A

Replacement part suitable for 16" Harry mowers. Blade dimensions: 405mm long with 16mm hole centre.

GHS Part No. 3490
REPLACES OEM 313.40.802

Replacement part suitable for 19" Harry mowers. Blade dimensions: 477mm long, 16mm hole dia, 10mm outter hole dia, spread 70mm hole centres.

GHS Part No. 3481
REPLACES OEM 302.40.803

Replacement part suitable for some Hatz engines. H 60.5mm x Dia 28mm. Hole centre 8mm

GHS Part No. 3606
REPLACES OEM N/A

131 Piece thread repair master kit comprising of the following sizes: M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75. Each kit contains: Installation tool, pin tab removal tool, correct size HSS drill & tap, Hex key and wire inserts.

GHS Part No. 3807
REPLACES OEM N/A

Replacement part suitable for the following Honda engines: GX110, GX120, GX140, GX160, GX200. 4.5mm diameter x 1 metre length.

GHS Part No. 1058
REPLACES OEM N/A

Replacement part suitable for GX140, GX160

GHS Part No. 2820
REPLACES OEM N/A

Replacement part suitable for Honda GX140, GX160, GX200 Engines.

GHS Part No. 2829
REPLACES OEM 91201 Z0T 801

Replacement parts suitable for Honda GX160 Engines. Pack of 10 seals.

GHS Part No. 2830
REPLACES OEM 91201 Z0T 801

Replacement parts suitable for GX160 engines. L 120mm x W 74mm x H 70mm

GHS Part No. 2353
REPLACES OEM 17210 883 505

Original part suitable for all Honda GX range engines.

GHS Part No. 3416
REPLACES OEM 90008-ZE2-003

Replacement parts suitable for the following Honda engines: GX160, GX200. These are only suitable for recoil starters with round starter pawls.

GHS Part No. 3706
REPLACES OEM N/A

Replacement part suitable for Honda GX200 engines.

GHS Part No. 2821
REPLACES OEM N/A

Replacement part suitable for Honda GX240, GX270 engines.

GHS Part No. 2822
REPLACES OEM N/A

Replacement part suitable for Honda engines GX340, GX390.

GHS Part No. 2873
REPLACES OEM N/A

Replacement part suitable for the following engines: GXV120, GXV160.The picture shows both sides of the cap, only one cap will be supplied.

GHS Part No. 3694
REPLACES OEM 17620-ZE7-000

Replacement parts suitable for Honda HR194, HR21, GXV120, GXV140, GV150, GV200. Air filter, Spark plug, 3 mtrs of Rope. Filter size L 187mm x W 60mm x H 48mm

GHS Part No. 2896
REPLACES OEM 17211-888-013

Replacement parts suitable for Honda tractor models: HF2415SB, HF2417HM, HF2417HT & Twin Cut TC102. Blade dimensions: 513mm, hole centre 18.5mm. outter hole centre 65mm, 9mm small holes.

GHS Part No. 3476
REPLACES OEM BUN194-OL

Pack of 2 male nipples for use with female hose coupling, our part number 2223.

GHS Part No. 3949
REPLACES OEM N/A

Threaded hose pipe tap connector suitable for either 1/2" or 3/4" garden taps. Use with our part number 2223

GHS Part No. 3952
REPLACES OEM N/A

Genuine part suitable for Husqvarna 235, 235E, 240 & 240E chainsaws. .325 pitch, 7 tooth sprocket

GHS Part No. 3464
REPLACES OEM 530048132

Replacement part suitable for the following Husqvarna models: 340, 345, 346, 350, 351, 353, 357, 359

GHS Part No. 3431
REPLACES OEM 537093101

Replacement part suitable for the following models: Husqvarna 36, 136, 141, Jonsered 2035, 2137, McCulloch Mac Cat 335, 441, 442, 444, Poulan 1900, 2050, 2100, 2900.

GHS Part No. 3872
REPLACES OEM N/A

Replacement part suitable for Husqvarna models 36, 136, 137.

GHS Part No. 3000
REPLACES OEM 530029805

Replacement part suitable for Husqvarna K750 cutoff saw. Supplied with 4 retaining screws.

GHS Part No. 3569
REPLACES OEM 506 38 56-12

Replacement parts suitable for most Husqvarna chainsaws. Handle supplied with 1 mtr of 4mm oem quality starter rope.

GHS Part No. 2894
REPLACES OEM N/A

Replacement parts suitable for all Walbro HD carburettors fitted to Husqvarna & Jonsered chainsaws.

GHS Part No. 2089
REPLACES OEM N/A

Suitable for all small engines. Checks both coils and plugs, full instructions included.

GHS Part No. 3092
REPLACES OEM N/A

Suitable for all machinery including cars, vans, motorcycles. Connects between ignition lead and spark plug to give a clear indication of ignition system function. A flash of the bulb indicates ignition / fuel problem.

GHS Part No. 3483
REPLACES OEM 6933982

7mm diameter x 12" 300mm Long

GHS Part No. 2073
REPLACES OEM N/A

Pack of 2 Fits most lawn tractor ignition switches.

GHS Part No. 1375
REPLACES OEM N/A

5 spade terminal Clockwise S,L,G,B,M. Fits Westwood 1649 & others.

GHS Part No. 1376
REPLACES OEM N/A

Replacement part suitable for Countax, Scag & Westwood tractors. 6 spade terminal Clockwise S,B,R,G,L,M.

GHS Part No. 1803
REPLACES OEM 44812900

Replaces points & condensor on small 2 stroke engines as fitted to hedgetrimmers & brushcutters.

GHS Part No. 1684
REPLACES OEM N/A

Suitable for diesel engines, 65 micron. 6mm & 8mm hose sizes. 4 3/4" long x 1 3/4" wide.

GHS Part No. 2079
REPLACES OEM N/A

Original part suitable for bending inner wires on cables. Useful tool for bending Z ends on cables.

GHS Part No. 2729
REPLACES OEM N/A

Replacement part suitable for Kawasaki TZ022, KT12AD 2 stroke engines.

GHS Part No. 1984
REPLACES OEM N/A

Replacement part suitable for the following Kawasaki strimmers: TD18, TD20, TD33, TD40, TD48, TG18, TG20, TG24, TG25, TG33, TH43, TH48, TF022D.

GHS Part No. 2972
REPLACES OEM 51049-2091

Replacement part suitable for most Kawasaki strimmers.

GHS Part No. 1719
REPLACES OEM 14069-2056

Replacement part suitable for Kawasaki KBH34, KBH43, KBH48 and most other small engines upto 80cc. Dual filtration, felt & stainless steel mesh screen, suitable for all 5mm id fuel hose

GHS Part No. 3564
REPLACES OEM 125-528

Replacement part suitable for the following Kawasaki engine models: KT12, TD24, TF22, TD18, TG18, TD33.

GHS Part No. 3988
REPLACES OEM 310370-6861A

Non original part suitable for some Kawasaki strimmers & hedgetrimmers. 20mm tall, 15mm dia at top, 17.5mm dia at base

GHS Part No. 2906
REPLACES OEM 49043-2065

Replacement part suitable for the following models: TD33, TD40, TD48, TH043, TH048.

GHS Part No. 3760
REPLACES OEM 13165-2958

Replacement part suitable for TH43 engines. Supplied with piston, ring, pin & circlips. 41.5mm diameter

GHS Part No. 3148
REPLACES OEM N/A

Replacement part suitable for TH48 engines. Supplied with piston, ring, pin & circlips. 44mm diameter

GHS Part No. 3147
REPLACES OEM N/A

Replacement part suitable for Kohler K91, K141, K181, K241, K301, K321, K341, K361. 54mm diameter 145mm long.

GHS Part No. 3510
REPLACES OEM 231281

Replacement part suitable for Kubota G1700, G1900, T1600, T1400, F1908, G2, G2HST, G3HST

GHS Part No. 1382
REPLACES OEM 13351-43010

Grinding stone, blade balancer & piston stop. Remove the blade from your machine before use and use suitable eye shields & protective gloves when using these tools

GHS Part No. 1880
REPLACES OEM N/A

Suitable for sharpening and balancing all rotary mower and brushcutter blades.

GHS Part No. 1075
REPLACES OEM N/A

Universal part suitable for many models. Supplied with bearings

GHS Part No. 3417
REPLACES OEM N/A

Explosive force in splitting logs in several pieces at once. Made from Cast Iron hardened and tempered. Patented head shape makes for an effective wedge. Diamond Shape. Only to be used with sledge hammers or splitting mauls & with safety wear.

GHS Part No. 3237
REPLACES OEM 65-504

Genuine Makita parts suitable for the following models: DCS43, DCS430, DCS431, DCS4300I, DCS52, DCS520, DCS5200I, DCS540.

GHS Part No. 3232
REPLACES OEM 027.213.050

Original part suitable for Mantis, Little Wonder, Echo garden machinery. For Zama C1U-K54 carburettors only. Please check your carburettor for the word 'Zama' & number C1.

GHS Part No. 2728
REPLACES OEM N/A

Original Mcculloch part suitable for the following models: 835, 836, 838, 839, S34P, S38P, S39P. Also fits JCB PCS38.

GHS Part No. 3770
REPLACES OEM 538322166/9

Genuine parts suitable for the following models: McCulloch 335, 338, 420, 438, 442. Partner 351, 352, 370, 371, 390.

GHS Part No. 3335
REPLACES OEM 545006036/2

Replacement parts suitable for Mcculloch, Ryobi, Echo machines fitted with Zama C1U carbs.

GHS Part No. 2363
REPLACES OEM N/A

Genuine Mcculloch part suitable for Mac 335, 435, 440

GHS Part No. 2819
REPLACES OEM FL5300712-59/2

Replacement part suitable for the following McCulloch Models: Mac Cat 318, 335, 436, 440, 441.

GHS Part No. 4131
REPLACES OEM 530039167

Replacement part suitable for McCULLOCH Mac Cat 318, 335, 436, 440, 441 chainsaws.

GHS Part No. 4131
REPLACES OEM 530039167

Replacement part suitable for McCulloch Mac Cat 335, 435, 440 & Partner 351 chainsaws.

GHS Part No. 4033
REPLACES OEM 530037793/3

Original part suitable for the following Partner & McCulloch models: P553, P553 CM, 6521 RS, 7021 RS, 5521 RS, 5521X.

GHS Part No. 4011
REPLACES OEM N/A

Genuine Walbro part suitable for Walbro carburettors fitted to Trim Mac 250. 15mm inner dia, 21mm outter dia. 17mm Tall

GHS Part No. 2928
REPLACES OEM 188-16-1

Replacement part suitable for some bump feed heads fitted to McCulloch, Alko & JCB strimmers. 1/4UNC x 1/2" Right Hand thread.

GHS Part No. 3866
REPLACES OEM N/A

7 piece set made up of the following sizes: 6, 7, 8, 9, 10, 11, 12mm. 6 mould forged fully polished chrome plated sockets.

GHS Part No. 1043
REPLACES OEM N/A

Great gift idea: A mini torch on a tripod keyring.86mm long. 3 position head with a positive on/off button.

GHS Part No. 4024
REPLACES OEM N/A

Replacement part suitable for the following engines: TL23, TL26.

GHS Part No. 3697
REPLACES OEM N/A

Suitable for chains up to type 520 but not O ring type chains. Can be used on Lawnmowers / Motorbikes.

GHS Part No. 3977
REPLACES OEM N/A

Replacement part suitable for Castel Garden, Mountfield, EL63, XE70. 235mm long x 35mm wide x 20mm hole centre.

GHS Part No. 2864
REPLACES OEM 27787045/1

Original Mountfield part suitable for EL63 & XE70 garden tractors.

GHS Part No. 3488
REPLACES OEM 12735460/0

Genuine Part suitable for Castel Garden, Mountfield EL63, XE70 tractors

GHS Part No. 3150
REPLACES OEM 84207103/2

Original part suitable for some Mountfield lawnmowers and will fit many other types. 12mm Hole centre x 26mm diameter (31mm including lip).

GHS Part No. 3879
REPLACES OEM 22122200-0

Original part suitable for some Mountfield, Champion & GGP lawnmowers. 30mm diameter x 12mm hole centre. Pack of 2 bearings.

GHS Part No. 3878
REPLACES OEM 22034508-0

Original part suitable for RV150 SV150 M150 V35 engines fitted to Mountfield, Stiga & Champion

GHS Part No. 3508
REPLACES OEM 18550015-0

Original part suitable for RV150 & SV150 engines fitted to Mountfield, Stiga & Champion mowers

GHS Part No. 3509
REPLACES OEM 18550026-0

Original part suitable for Mountfield SV150, RV150, RV40, M150, V35, V40, RM45 engines

GHS Part No. 3475
REPLACES OEM 18550126/0

Original part suitable for Mountfield / GGP RV150 & SV150 engines. Converts the recoil assembly that has the fuel tank built in to having the recoil & tank as seperate parts, supplied with full instructions.

GHS Part No. 3563
REPLACES OEM 18550000/2

Original part suitable for Mountfield, Champion, Stiga and many more models using the SV150 engine

GHS Part No. 3624
REPLACES OEM 18550133-0

Replacement parts suitable for all Champion, Mountfield, Lawnking SV150, RV150 engines. Starter handle supplied with 1 metre of 4mm rope.

GHS Part No. 3625
REPLACES OEM 18550052-0

Replacement part suitable for Mountfield, Champion, Lawnking lawnmowers fitted with SV150, RV150 engines.

GHS Part No. 3626
REPLACES OEM N/A

Replacement part suitable for Mountfield / Castel Garden / Stiga models SV-150, SV40, RV45. 130mm x 108mm x 25mm

GHS Part No. 2997
REPLACES OEM 18550011/0

Original part suitable for some Mountfield Champion & Lawnking lawnmowers and will fit many other types.

GHS Part No. 3880
REPLACES OEM 81007351-0

Replacement part suitable for Mountfield, Castel Garden TC102, TC122. 79mm dia, 12mm hole size, 65mm wide.

GHS Part No. 2996
REPLACES OEM 82700002/0

Replacement part suitable for some Mountfield, Castel Garden TC102, TC122. Diameter 79mm, Hole centre 12mm, 65mm wide. The picture shows both sides of the wheel, if your wheel has a recess on one side please see our other listing.

GHS Part No. 2994
REPLACES OEM 82700000/0

Original Mountfield part suitable for RV150 & SV150 engines.

GHS Part No. 3480
REPLACES OEM 118550139/1

Original part as fitted to some Champion, Lawnking, Mountfield & Sovereign lawnmowers.

GHS Part No. 3482
REPLACES OEM 18550001-0

Formulated for grasscare and industry applications. High mechanical stability from -30 c to 150 c.

GHS Part No. 3274
REPLACES OEM 853605

A preminum quality mineral oil, lithium thickened lubricating grease suitable for multi-purpose applications in plain & anti-friction bearings. Contains extreme pressure & oxidation resistant additives to reduce wear & improve grease performance to extend component life. Operating temperature range -20 C to 140 C. Not suitable for strimmer gearboxes

GHS Part No. 3350
REPLACES OEM N/A

Twin pack of NGK BM6A spark plugs.

GHS Part No. 1560
REPLACES OEM BM6A

Genuine NGK part suitable for Robin EY15, EY20, EY40 engines.

GHS Part No. 2895
REPLACES OEM BR6HS

NGK spark plug cap suitable for all machines with this type of cap fitted.

GHS Part No. 3613
REPLACES OEM 8051

Genuine NGK part.Maximum heat & voltage resistance, waterproof, long life durability with high quality performance. Made in Japan. Screw in for 7mm HT lead.

GHS Part No. 3220
REPLACES OEM 8710

Locks the piston for flywheel & clutch removal on chainsaws, strimmers and small engines etc. Universal, for all applications.

GHS Part No. 4152
REPLACES OEM N/A

Suitable for use of removal of oil & most fluids. Cleanly extracts oil or water from engines through the filler or dipstick holes. 4 Litre tank

GHS Part No. 3178
REPLACES OEM N/A

Suitable for small engines. Contains oil extractor, 1 litre waste oil container & funnel.

GHS Part No. 1417
REPLACES OEM N/A

1.25 litre. Puncture free O.K.O tyre sealant with proven puncture protection. Seals puncture instantly with a permanent seal & extends useful tyre life. Supplied with application guidelines for amount of O.K.O tyre sealant per tyre.

GHS Part No. 1991
REPLACES OEM N/A

Trade pack of 12.

GHS Part No. 2057
REPLACES OEM N/A

Replacement part suitable for some models of lawnmower. Outer cable 1420mm, inner cable 1328mm, travel 8"

GHS Part No. 2758
REPLACES OEM N/A

Replacement part suitable for some models of lawnmower. Outer cable 40", inner cable 50 1/2", travel 8".

GHS Part No. 2757
REPLACES OEM N/A

Pack of 3 Oregon 6" flat files

GHS Part No. 1877
REPLACES OEM N/A

Semi Synthetic 2 stroke oil suitable for all modern 2 stroke engines. 1 x 100ml bottle mixes with 5 Litres of petrol to give a 50:1 mixture ratio. Please check your machines handbook to make sure this ratio is suitable.

GHS Part No. 3757
REPLACES OEM N/A

300ml Brake Cleaner. An effective way to remove dust and residue. Leaves no residue.

GHS Part No. 2680
REPLACES OEM n/a

A preminum quality mineral oil, lithium thickened lubricating grease suitable for multi-purpose applications in plain & anti-friction bearings. Contains extreme pressure & oxidation resistant additives to reduce wear & improve grease performance to extend component life. Operating temperature range -20 C to 140 C. Not suitable for strimmer gearboxes

GHS Part No. 3351
REPLACES OEM N/A

A preminum quality mineral oil, lithium thickened lubricating grease suitable for multi-purpose applications in plain & anti-friction bearings. Contains extreme pressure & oxidation resistant additives to reduce wear & improve grease performance to extend component life. Operating temperature range -20 C to 140 C. Not suitable for strimmer gearboxes

GHS Part No. 3353
REPLACES OEM N/A

Genuine Oregon 3/16 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3234
REPLACES OEM 70508

Genuine Oregon 5/32 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3233
REPLACES OEM 70509

Genuine Oregon 7/32 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3235
REPLACES OEM 70507

Replacement part suitable for most Husqvarna, Partner & Jonsered chainsaws.

GHS Part No. 3369
REPLACES OEM 503443201

Replacement parts suitable for all small engines which have 4.5mm id fuel hose.

GHS Part No. 3589
REPLACES OEM N/A

A preminum quality mineral oil, lithium thickened lubricating grease suitable for multi-purpose applications in plain & anti-friction bearings. Contains extreme pressure & oxidation resistant additives to reduce wear & improve grease performance to extend component life. Operating temperature range -20 C to 140 C. Not suitable for strimmer gearboxes

GHS Part No. 3352
REPLACES OEM N/A

Replacement part suitable for HS carbs fitted to Partner K650 Active cutoff saws.

GHS Part No. 1389
REPLACES OEM N/A

Concentrated fuel stabilizer for all sizes of 2 & 4 stroke engines. Keeps fuel fresh for easy starting and it contains a water remover. Quick measure bottle treats 20 gallons.

GHS Part No. 2013
REPLACES OEM N/A

Original part suitable for all small engines. Supplied with 3 sizes of clamps, 34mm to 50mm

GHS Part No. 2899
REPLACES OEM N/A

Locks the piston for flywheel & clutch removal on chainsaws, strimmers and small engines etc. Universal, for all applications.

GHS Part No. 1397
REPLACES OEM N/A

Replacement parts sutiable for Poulan 2050 chainsaws. 38mm diameter piston supplied with rings, pin & circlips.

GHS Part No. 1974
REPLACES OEM N/A

Replacement parts suitable for Poulan 2050 chainsaws.

GHS Part No. 1886
REPLACES OEM N/A

Replacement part suitable for Qualcast, Bosch, Rotak 32, 320 rotary mower.

GHS Part No. 3494
REPLACES OEM F016800108

Replacement part suitable for all makes of garden machinery.

GHS Part No. 2945
REPLACES OEM N/A

Clear visor suitable for our brushcutter helmet.

GHS Part No. 2050
REPLACES OEM N/A

Replacement part suitable for some Robin engines.

GHS Part No. 3574
REPLACES OEM 660000361

Replacement part suitable for the following Robin engines: EH09, EY08, EY15D, EY20

GHS Part No. 3228
REPLACES OEM 2273600203

Replacement part suitable for Robin EY15 engines.

GHS Part No. 1906
REPLACES OEM 206 32601 07

Replacement parts suitable for Robin EY15 engines.

GHS Part No. 3222
REPLACES OEM N/A

Replacement part suitable for RObin EY15 engines.

GHS Part No. 4221
REPLACES OEM 226-70130-08

Replacement parts suitable for Robin EY15D engines.

GHS Part No. 1905
REPLACES OEM 227 32610 07

Replacement parts suitable for Robin EY18 engines.

GHS Part No. 3223
REPLACES OEM N/A

Replacement part suitable for Robin EY20 engines. 118mm base dia. 64mm top dia (without foam) 60mm tall.

GHS Part No. 2910
REPLACES OEM 227-32610-07

Replacement parts suitable for Robin EY20 engines.

GHS Part No. 2907
REPLACES OEM N/A

Replacement parts suitable for Robin EY20 engines.

GHS Part No. 3221
REPLACES OEM 227-79460-11

Replacement parts suitable for Robin EY28 engines.

GHS Part No. 3224
REPLACES OEM N/A

Suitable for small engines where this type of plug is fitted. Replaces NGK B2LM, CHAMPION J19LM.

GHS Part No. 2681
REPLACES OEM B2LM

Suitable for small engines where this type of plug is fitted. Replaces NGK BCPR5ES.

GHS Part No. 2683
REPLACES OEM BCPR5ES

Suitable for small engines where this type of plug is fitted. Replaces NGK BM6A, CHAMPION CJ8.

GHS Part No. 2685
REPLACES OEM BM6A

Suitable for small engines where this type of plug is fitted. Replaces NGK BPM7A, CHAMPION CJ6Y, CJ7Y.

GHS Part No. 2687
REPLACES OEM BPM7A

Replacement part suitable for TS400 cutoff saw. Replaces NGK BPMR7A

GHS Part No. 2688
REPLACES OEM BPMR7A

Suitable for small engines where this type is fitted. Replaces NGK BPR5ES, CHAMPION RN12YC.

GHS Part No. 2689
REPLACES OEM BPR5ES/RN12YC

Suitable for small engines where this type of plug is fitted. Replaces NGK BPR6ES, CHAMPION RN9YC.

GHS Part No. 2690
REPLACES OEM BPR6ES/RN9YC

Suitable for small engines where this type of plug is fitted. replaces NGK BR2LM, CHAMPION RJ19LM.

GHS Part No. 2691
REPLACES OEM BR2LM/RJ19LM

Magnetic wall or bench mounted, with telescopic tracking arm. Max centre diameter: 11/2".

GHS Part No. 1516
REPLACES OEM N/A

Replacement part suitable for many applications. Fits handle bars 22 to 23.5mm, Overall length 50mm.

GHS Part No. 3863
REPLACES OEM N/A

Excellent quality CE work gloves for builders and gardeners. Large size (9) to fit hands with 9.5cm across palm width. Either green or blue sent

GHS Part No. 3577
REPLACES OEM N/A

Replacement part suitable for many Ryobi strimmers. 2.5mm Internal diameter, 5.0mm External diameter, 500mm length. Please check your current fuel pipe match these dimensions.

GHS Part No. 3897
REPLACES OEM NA

Replacement parts suitable for Dolmar 120 chainsaws. 49mm diameter piston supplied with rings, pin & circlips.

GHS Part No. 3828
REPLACES OEM 121 132 000

Replacement parts suitable for Sachs Dolmar 309 Disc cutter. Main, inner, and pre filters

GHS Part No. 2933
REPLACES OEM N/A

Replacement part suitable for Sachs Dolmar 309.

GHS Part No. 3067
REPLACES OEM 133 120 301

Replacement part suitable for Sachs Dolmar 309 disc cutter.

GHS Part No. 3068
REPLACES OEM 123 174 159

Replacement parts suitable for Sachs Dolmar 309 saws. Kit supplied with 47mm piston, rings, circlips & pin.

GHS Part No. 3239
REPLACES OEM N/A

7 Piece. Sizes: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2". 7 mould forged fully polished chrome plated 6 point sockets. Soft grip handles.

GHS Part No. 1329
REPLACES OEM N/A