Chainsaw Accessories

.325 8 teeth, small size (19mm internal hole diameter)..

GHS Part No. 2610
REPLACES OEM N/A

.404 7 teeth standard size (22.5mm internal diameter hole) suitable for Stihl.

GHS Part No. 2608
REPLACES OEM N/A

100 foot roll of 3/8 low pro 050 gauge saw chain. Suitable replacement for Oregon 91S & Stihl Picco.

GHS Part No. 3865

3/16, 4.8mm stone. Suitable for 12V hand held grinder where a screw in thread is required.

GHS Part No. 3399
REPLACES OEM N/A

7/32, 5.5mm stone. Suitable for 12V hand held grinder where a screw in thread is required.

GHS Part No. 3400
REPLACES OEM N/A

Replacement part suitable for some Alpina, Dolmar, Echo, Makita, Oleo, Poulan, Ryobi chainsaws.

GHS Part No. 1721
REPLACES OEM N/A

Replacement part suitable for the following Stihl chainsaws fitted with a 12" guide bar: 009, 010, 011, 012, 018, 020, 021, 023, 025, E160, E180, MST190T, MS180, MS200, MS210, MS230, MS250. Requires a 3/8 pitch, 050 (1.3mm) gauge, 44 drive link chain - see our part number 3814

GHS Part No. 3719
REPLACES OEM N/A

Replacement part suitable for the following Stihl models: 017, MS170. 3/8 Pitch, .043 gauge, requires a 50 drive link chain. Please see our part number 2177

GHS Part No. 2673
REPLACES OEM N/A

3/8 Pitch 050 gauge Carlton guide bar suitable for the follwoing Husqvarna models: 33, 38, 40, 42, 44, 45, 49, 50, 51, 55, 57, 133, 137, 140, 140S, 154, 234, 238, 240, 242, 242XP, 246, 254, 254XP, 340, 345, 346, 346XP, 350, 351, 360, 444, 445.

GHS Part No. 3985
REPLACES OEM N/A

Replacement part suitable for Stihl, Husqvarna and many other makes where this size wrench is used. 17mm x 19mm sockets with flat screwdriver end for bar adjustment.

GHS Part No. 1098
REPLACES OEM N/A

Pack of 2 18" chains suitable for Tarus, AMA, Timbertech, Newstar and many other Chinese chainsaws. Please check your chains match before ordering: pitch .325, gauge 0.58 (1.5mm) 72 drive links.

GHS Part No. 3737
REPLACES OEM N/A

For two stroke fuel. Ideal for all 2 stroke engines, will mix 1 litre of petrol at 25:1, 32:1, 40:1 or 50:1.

GHS Part No. 1594
REPLACES OEM N/A

Professional chain grinder suitable for all common chainsaw chain sizes. High performance motor, rotating tensioning device and grinding head so that both sprocket positions of the chain can be sharpened without resetting, illumination of the sharpening zone, distortion-free aluminium die cast frame, automatic resetting of the grinder head, all settings easy to manage, supplied with grinding discs for use with 3/8" and .404 pitch chain and a grinding disc for use with 1/2" and depth gauges chain and bumper link.

GHS Part No. 3758
REPLACES OEM N/A

3/16" (4.8mm) Suitable for .325 pitch chain

GHS Part No. 1019
REPLACES OEM N/A

1 dozen pack of 3/16" 4.8mm Oregon files.

GHS Part No. 1076
REPLACES OEM N/A

Kit contains: 4 x 3/16" round files,1 x 6" flat file, 1 x bar groove cleaner, 1 x depth gauge tool,1 x 13/19mm plug/bar nut spanner,1 x small screwdriver, 1 x file handle showing file angles,1 x file handle for flat file.

GHS Part No. 2085
REPLACES OEM N/A

Replacement part suitable for Husqvarna chainsaws. 3/8 7 teeth standard size 22mm internal hole diameter.

GHS Part No. 2605
REPLACES OEM N/A

3/8" 7 teeth, small size (19mm internal hole diameter).

GHS Part No. 2606
REPLACES OEM N/A

3/8 8 teeth standard size (22mm internal hole diameter) Husqvarna Stihl.

GHS Part No. 2607
REPLACES OEM N/A

3/8 LP Pitch, 050 1.3mm Gauge 52 Drive Link Chains. Pack of 5

GHS Part No. 1590
REPLACES OEM N/A

3/8 LP Pitch, 050 1.3mm Gauge 52 Drive Link Chains. Pack of 2

GHS Part No. 1592
REPLACES OEM N/A

Oregon file suitable for all makes of chain where this size is required.

GHS Part No. 3418
REPLACES OEM N/A

1 x 5/32 4mm Oregon file suitable for 3/8 low profile chains as fitted to domestic hobby type chainsaws.

GHS Part No. 1729
REPLACES OEM N/A

1 dozen pack of 5/32" 4.00mm.

GHS Part No. 1568
REPLACES OEM N/A

Kit contains: 4 x 5/32" round files,1 x 6" flat file, 1 x bar groove cleaner, 1 x depth gauge tool,1 x 13/19mm plug/bar nut spanner, 1 x small screwdriver, 1 x file handle showing file angles,1 x file handle for flat file.

GHS Part No. 2070
REPLACES OEM N/A

9" long Hardened and tempered, drop forged, carbon steel 2.7kg(6lb) wedge. For use with a sledgehammer or maul. Always use protective equipment when using this item.

GHS Part No. 3700
REPLACES OEM N/A

7" Plastic felling wedge with serrations on both sides.

GHS Part No. 3751
REPLACES OEM N/A

7/32" (5.5mm) suitable for 3/8 standard & .404 chain

GHS Part No. 1020
REPLACES OEM N/A

1 dozen pack of 7/32" 5.5mm Oregon files.

GHS Part No. 1039
REPLACES OEM N/A

Kit contains: 4 x 7/32" round files,1 x 6" flat file, 1 x bar groove cleaner, 1 x depth gauge tool,1 x 13/19mm plug/bar nut spanner,1 x small screwdriver, 1 x file handle showing file angles 1 x file handle for flat file.

GHS Part No. 2398
REPLACES OEM N/A

Bench mounted rivet spinner insert suitable for 3/8 low profile & .325 pitch chainsaw chain. 22mm long x 10mm wide, please check these dimensions against your current insert.

GHS Part No. 3827
REPLACES OEM N/A

Bench mounted rivet spinner insert suitable for 3/8 standard & .404 pitch chainsaw chain. 22mm long x 10mm wide, please check these dimensions against your current insert.

GHS Part No. 3826
REPLACES OEM N/A

Includes 12v automobile power adaptor and alligator clips. Comes with 3 stones, 5/32, 3/16, 7/32

GHS Part No. 3050
REPLACES OEM 78015

Genuine Carlton 3/16 (4.8mm) pack of 2 stones suitable for Carlton & Oregon 12V push fit handheld chain sharpeners.

GHS Part No. 3128
REPLACES OEM 78015-2

Genuine Carlton 5/32 (4.00) pack of 2 stones suitable for Carlton & Oregon 12V push fit handheld chain sharpeners

GHS Part No. 3127
REPLACES OEM 78015-1

Genuine Carlton 7/32 (5.5mm) pack of 2 stones suitable for Carlton & Oregon 12V push fit handheld chain sharpeners.

GHS Part No. 3129
REPLACES OEM 78015-3

3/16" 4.80mm. Supplied with file, handle & guide plate for fast and accurate chain sharpening.

GHS Part No. 1884
REPLACES OEM N/A

5/32" 4.00mm. Supplied with file, handle & guide plate for fast and accurate chain sharpening.

GHS Part No. 2032
REPLACES OEM N/A

7/32" 5.50mm. Supplied with file, handle & guide plate for fast and accurate chain sharpening.

GHS Part No. 1885
REPLACES OEM N/A

Flanged bar nuts with 10mm thread. Pack of 2

GHS Part No. 2501
REPLACES OEM N/A

Easy to use tool, universal for all makes & sizes of chainsaw chain

GHS Part No. 3262
REPLACES OEM N/A

Bench type chain breaker. Makes chain breaking fast & easy. Supplied with anvil & punch.

GHS Part No. 2002
REPLACES OEM N/A

Chainsaw bench tools suitable for breaking and repairing all types of chainsaw chain.

GHS Part No. 2117
REPLACES OEM N/A

Chain breaker punch suitable for most chain breakers.

GHS Part No. 3261
REPLACES OEM N/A

Suitable for: 3/8 pitch 050 (1.3mm) gauge chains.

GHS Part No. 4276
REPLACES OEM N/A

Pack of 10 preset & plain joining links. Suitable for: 3/8 pitch 058 (1.5mm) gauge chains.

GHS Part No. 4281
REPLACES OEM N/A

Suitable for: 325 pitch 050 (1.3mm) gauge chains.

GHS Part No. 4278
REPLACES OEM N/A

Suitable for: 325 pitch 058 (1.5mm) gauge chains.

GHS Part No. 4279
REPLACES OEM N/A

Pack of 10 preset & plain joining links. Suitable for: 325 pitch 063 (1.6mm) gauge chains.

GHS Part No. 4280
REPLACES OEM 4280

5 options available

Suitable for all chainsaw guide bars with sprocket nose ends. Metal construction with pump action

GHS Part No. 3489
REPLACES OEM N/A

5 options available

Chainsaw helment supplied with mesh visor,ear muffs & chin strap. CE approved. Chainsaw gloves: Hide palm & water repellant nylon backed gloves. Left hand incorporates a special chainsaw chain anti-cut material. CE approved to EN381-7 16 m/s, complies with PPE directive 93/95/EEC.

GHS Part No. 3327
REPLACES OEM N/A

Holds 5 litres of fuel & 2.5 litres of oil. Supplied with pouring spout.

GHS Part No. 1368
REPLACES OEM N/A

Used in combination with a flat file to adjust saw chain raker height.

GHS Part No. 1613
REPLACES OEM N/A

Oregon filing kit containing: file holder, round file with handle, 6" flat file with handle, depth guage & a bar cleaning tool.

GHS Part No. 2034
REPLACES OEM 90405

Oregon filing kit containing: file holder, round file with handle, 6" flat file with handle, depth guage & a bar cleaning tool.

GHS Part No. 2034
REPLACES OEM 90405

Used to adjust saw chain raker height

GHS Part No. 1652
REPLACES OEM N/A

Chainsaw guide bar grease gun supplied with grease.

GHS Part No. 3045
REPLACES OEM N/A

For our electric chain grinder. Suitable for 3/8" (not hobby type)& .404 pitch chains.105mm X 4.7mm X 22.2mm.

GHS Part No. 1233
REPLACES OEM N/A

For our electric chain grinder.Suitable for 3/8" (hobby type)1/4" & .325 pitch chains.105mm X 3.2mm X 22.2mm.

GHS Part No. 1234
REPLACES OEM N/A

Fits onto chainsaw guide bar, no need to remove chain for sharpening. Suitable for all chain types. Supplied with 3 assorted files - 5/32, 3/16, 7/32.

GHS Part No. 3275
REPLACES OEM N/A

Replacement part suitable for Husqvarna 281, 288, 1100, 2100 chainsaws.

GHS Part No. 2304
REPLACES OEM 501293301

Replacement part suitable for Husqvarna 33, 38, 40, 42,44, 45, 50, 55, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 259, 261, 262, 335, 340, 345, 346XP, 350, 351, 357, 359, 362, 444, EL16, EL1200, EL1400, EL1500, EL1600

GHS Part No. 1849
REPLACES OEM 158-D10-UHL

Original Oregon part suitable for Husqvarna 340, 345, 350 & Jonsered 2145 chainsaws

GHS Part No. 3592
REPLACES OEM 108308X

Replacement part suitable for the following Husqvarna models: 36, 41, 136, 137, 141, 142.

GHS Part No. 4213
REPLACES OEM 530 01 44-10

Replacement parts suitable for the following Husqvarna models: 36, 41, 136, 137, 141, 142. Service kit contains: Air filter, fuel filter & spark plug.

GHS Part No. 4255
REPLACES OEM N/A

Replacement part suitable for Husqvarna chainsaw. Fits models 36, 41, 136, 137, 141, 142. Picture shows both sides of the exhaust for reference. (only 1 full exhaust supplied)

GHS Part No. 2709
REPLACES OEM 530069415

Replacement part suitable for Husqvarna chainsaws 36, 41, 136, 137, 141, 142. .325 pitch, 7 teeth. inner shaft size 13mm

GHS Part No. 2699
REPLACES OEM 530069342

Replacement part suitable for Husqvarna 40, 51, 55, 61, 268 chainsaws. Size 12.7 x 15.85 x 12.3mm

GHS Part No. 3393
REPLACES OEM 503253401

Replacement parts suitable for the following Husqvarna models: 61, 66, 162, 266, 268, 272. 3/8 Pitch 7 tooth sprocket.

GHS Part No. 2466
REPLACES OEM 503650901

Genuine part suitable for Husqvarna / McCulloch EM235 chainsaws.

GHS Part No. 3126
REPLACES OEM 538243909

Explosive force in splitting logs in several pieces at once. Made from Cast Iron hardened and tempered. Patented head shape makes for an effective wedge. Diamond Shape. Only to be used with sledge hammers or splitting mauls & with safety wear.

GHS Part No. 3237
REPLACES OEM 65-504

Replacement part suitable for some Alpina, Dolmar, Echo, Makita, Oleo, Poulan, Ryobi chainsaws.

GHS Part No. 1644
REPLACES OEM N/A

For guide bar grease application.

GHS Part No. 1384
REPLACES OEM N/A

Pack of 3 Oregon 6" flat files

GHS Part No. 1877
REPLACES OEM N/A

1 Dozen Pack of quality Swiss made files which have a special twin cut design with precision cutting tooth angles to remove more material per stroke & resist clogging.

GHS Part No. 1878
REPLACES OEM N/A

Genuine Oregon chain suitable for all hobby chainsaws using 3/8 050 (1.3mm) chain. 100 foot roll.

GHS Part No. 3984
REPLACES OEM 91VXL100U

Oregon 3/16" 4.80mm kit containing: file holder, round file with handle, 6" flat file with handle, depth gauge & bar cleaning tool.

GHS Part No. 1690
REPLACES OEM N/A

Oregon 7/32" 5.50mm kit containing: file holder, round file with handle, 6" flat file with handle, depth gauge & bar cleaning tool.

GHS Part No. 1691
REPLACES OEM N/A

Oregon 5/32" 4.00mm kit containing: file holder, round file with handle, 6" flat file with handle, depth gauge & bar cleaning tool.

GHS Part No. 2034
REPLACES OEM N/A

Genuine Oregon 3/16 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3234
REPLACES OEM 70508

Genuine Oregon 5/32 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3233
REPLACES OEM 70509

Genuine Oregon 7/32 Double cut round files design with precision cutting tooth angles, removes more material than a single cut file over the life of the file. Resists clogging with superior performance, stays sharp for longer.

GHS Part No. 3235
REPLACES OEM 70507

Twin pack of file handles suitable for 4.8mm to 5.5mm files (3/16 - 7/32)files.

GHS Part No. 1557
REPLACES OEM N/A

Fits onto chainsaw guide bar, no need to remove chain for sharpening. Suitable for all chain types. Supplied without files.

GHS Part No. 1402
REPLACES OEM N/A

Suitable for all types of chainsaw files including flat files.

GHS Part No. 2499
REPLACES OEM N/A

Bench type, supplied with spinner insert for 3/8" to 1/2" chain. Inserts are also available for 1/4" to .325 chain.

GHS Part No. 2174
REPLACES OEM N/A

Replacement part suitable for Ryobi PCN3335 chainsaws

GHS Part No. 3355
REPLACES OEM AC50419058

Genuine Ryobi part suitable for PCN3335, PCN4040, PCN4545 ch.

GHS Part No. 2866
REPLACES OEM 671104001

Genuine Ryobi part suitable for PCN4040 & PCN4545.

GHS Part No. 2385
REPLACES OEM 308074003

Genuine Ryobi part suitable for RCS3540, RCS4040, RCS4046 chainsaws.

GHS Part No. 3238
REPLACES OEM 308540001

Replacement part suitable for Stihl 009, 010, 011, 012,020T, MS200T

GHS Part No. 2639
REPLACES OEM 1120 640 2000

Replacement part suitable for Stihl 017, 018, 019, 019T, 021, 023, 025, MS170, MS180, MS190, MS190T, MS191T, MS210, MS250. 3/8 pitch 6 tooth.

GHS Part No. 2362
REPLACES OEM 1123 640 2073

Replacement part suitable for Stihl 017, 018, 019T, 021 023, 024, 025, 026, 029, 034, 036, 039, MS170, MS180, MS181, MS190T, MS210, MS211, MS230, MS250, MS260, MS270, MS290, MS310

GHS Part No. 2474
REPLACES OEM 9512 933 2260

Replacement part suitable for Stihl 020

GHS Part No. 2636
REPLACES OEM 1114 640 2001

Replacement part suitable for Stihl 021, 023, 025. .325 pitch, 7 teeth.

GHS Part No. 2711
REPLACES OEM 1123 640 2015

Replacement part suitable for Stihl 024, 026 Before serial number X25809074

GHS Part No. 2637
REPLACES OEM N/A

20" Oregon guide bar suitable for the following Stihl chainsaws: 024, 026, 028, 030, 031, 032, 034, 036, 038, 040, 041, 042, 044, 045, 048, 056, 064, 066, MS280, MS380, MS440, MS460, MS640, MS660.

GHS Part No. 3412
REPLACES OEM N/A

Replacement part suitable for 026 models after s/n x25809074, MS260, MS270, MS280 chainsaws. .325 pitch 7 tooth

GHS Part No. 3159
REPLACES OEM N/A

Replacement part suitable for Stihl 028.

GHS Part No. 2710
REPLACES OEM 1118 640 2001

Replacement part suitable for the following Stihl chainsaws with .325 pitch chain fitted: 029 039 034 036 MS290 MS310 MS390.

GHS Part No. 4021
REPLACES OEM 1125 640 2005

Replacement part suitable for Stihl 029, 034, 036, 039, MS290, MS310, MS360, MS390. 3/8 7 Tooth sprocket

GHS Part No. 2469
REPLACES OEM 1125 640 2007

Replacement part suitable for the following Stihl models: 029 039 034 036 MS290 MS310 MS390. .325 pitch 7 tooth sprocket. 13mm hole centre, supplied without bearing.

GHS Part No. 4021
REPLACES OEM 1125 640 2005

Replacment part suitable for the following Stihl models: 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 048, 056, 064, 066, MS290, MS310, MS280, MS380, MS390, MS440, MS460, MS640, MS660.3/8 Pitch, 063 Gauge. Takes a 66 drive link chain.

GHS Part No. 3798
REPLACES OEM N/A

Replacement part suitable for Stihl 034, 036, 044, 046, MS360, MS361, MS362, MS441, MS440, MS460 chainsaws. 10 x 16 x 12mm

GHS Part No. 3392
REPLACES OEM 9512 933 2380

Replacement part suitable for Stihl 038, 042, 048, MS380, MS381 chainsaws.

GHS Part No. 2473
REPLACES OEM 9512 933 3150

Replacement parts suitable for Stihl chainsaws 044, 046, MS440, MS460. 3/8 pitch, 7 teeth

GHS Part No. 2712
REPLACES OEM 1128 640 2005

Replacement part suitable for Stihl 064, 066, MS640 & MS660.

GHS Part No. 2638
REPLACES OEM 1122 640 2006

Replacement part suitable for Stihl 08s chainsaws. .404 7 Tooth sprocket

GHS Part No. 2470
REPLACES OEM 1108 640 2005

Genuine Stihl file suitable for all 325 pitch chains.

GHS Part No. 3376
REPLACES OEM 5605 772 4806

Genuine Stihl file suitable for all 3/8 EP & 1/4 pitch chains. For use on 009, 010, 011, 018, 019, 017, 018, MS170, MS180, 020, 021, 023, 025, MS200T, MS210, MS230, MS250 and many other makes & models. Please check hand book for correct file size.

GHS Part No. 3375
REPLACES OEM 5605 772 4006

Genuine Stihl file suitable for all 3/8 standard & 404 pitch chains.

GHS Part No. 3377
REPLACES OEM 5605 772 5506

Replacement part suitable for the following Stihl models: 017, 018, 019, 021, 023, 024, 025, 026, 028, 029, 034, 036, 039, MS170, MS171, MS180, MS181, MS191, MS210, MS230, MS240, MS250, MS260, MS280, MS290, MS310, MS340, MS360, MS390. 27mm diameter.

GHS Part No. 3825
REPLACES OEM 0000 958 1022

Chainsaw tool including: Spark plug spanner with torx end, small screwdriver, pouch.

GHS Part No. 2539
REPLACES OEM N/A

Oregon 12" guide bar suitable for the following Stihl chainsaws: 009, 010, 011, 012, 015, MS180, 018, MS181, 190, 190T, 019, 019T, 191T, MS200, MS200T, 020, 020T, MS210, 021, MS211, MS230, 023, MSE160, MSE180, E10, E14, E140, E160, E180, E200. Please note this guide bar requires a 3/8 pitch 050 gauge 44 drive link chain, please see our part number 3814.

GHS Part No. 3983
REPLACES OEM N/A

Hammer into tree stump or log for on site sharpening.

GHS Part No. 1355
REPLACES OEM N/A

Replacement part suitable for most chainsaws, strimmers, brushcutters & hedgetrimmers.

GHS Part No. 1617
REPLACES OEM N/A